- Jaw Crusher
Introduction of Jaw Crusher: PE/PEX Series Jaw Crusher has the features of high crushing and even product size ratio. It can be used to crush material, whose compression strength is not more than 320Mpa. PE Series is used in primary crushing...
- Impact Crusher
Working Principle of Impact Crusher: The electric motor drive the rotor to high speed, when the material was fed to the crushing chamber from feed inlet, the material will be struck by the plate hammer on the rotor, then will be thrown to th...
- Symons Cone Crusher
This machine adopts grease sealing so as to prevent the watering and draining system from being blocked and avoid the defect of easy mix of water and oil. The spring safety system is the protection unit against overload, and it can keep the ...
- Spring Cone Crusher
The safety spring system is the overload protection device, which makes foreign material goes through the machine without bring any hurt to it. The sealing modes are oil and water, which segregate the stone powder and lubricating system.
- Hydraulic Cone Crusher
Introduction of Hydraulic Cone Crusher: H Series hydraulic cone crusher get to world advanced level, is designed and made through absorbing world advanced crushing technology. It is widely used in metallurgical, aggregate, building material ...
- Sand Making Machine
Introduction of our Sand Making Machine: UT Series Sand Making Machine (Vertical Shaft Impact Crusher), which is high-functioned equipment for making sand and shaping, is researched and produced by our corporation, absorbed with the advance...
- Vibrating Screen
Advantages are: stable structure, strong exciting force, high efficiency, little noise pollution, handy maintenance and safety; circular vibrating screen has been widely used in mine, construction, transportation, energy and chemical industr...
- Vibrating Feeder
Features and Benefits of our Vibrating Feeder: Smooth vibrating; The special fence can prevent the block of raw material; The distance between fences is adjustable.
- Ball Mill
Introduction of Ball Mill: Ball mill is mainly used for grinding materials in such production industries as cement, silicate product, new building materials, chemical engineering, nonferrous and black metal, mineral processing, glass and cer...
- Wheel Type Sand Washer
Sand Washer Features and Benefits: Reasonable structure, convenient maintenance; High processing capacity and low power consumption; low of wearing parts consumption, low cost.
- Screw Type Sand Washer
Its novel sealed structure, totally-enclosed oil-bath transmission system and adjustable overflow slice ensure the characteristics of high efficiency, durability, cleanness, good dehydrating effect and reliable product size.
- Crawler Drill
Crawler Drill: Model: KY-100; Hole diameter: 80~105(mm); Drill depth: 20(m); Work pressure: 0.5~0.7(Mpa); Air consumption: ≥10 (mP3P/min); Rotating speed: 0~65 (rmp); Lifting capacity: 17(KN). Model: KY-120 …, Model: KY-140 ….
- Belt Conveyor
Belt conveyors are the most commonly used powered conveyors because they are the most versatile and the least expensive. Product is conveyed directly on the belt so both regular and irregular shaped objects, large or small, light and heavy, ...
- Magnetic Separator
The Magnetic Separator is used for separating crude mineral by different magnetic rigidities. The machine works under the magnetic force and machine force. Magnetic Separators are designed to recover ferromagnetic materials.