2014/5/26 2:25:53
Mobile crusher plant is applied for crushing various materials with medium hardness and weak abrasiveness. The compressive strength of the material that was crushed by the mobile crusher plant is no more than 100 MPa, the moisture content of which is less than 15%. The generally crushed material includes coal, salt, chalk, gypsum, bricks, limestone, etc. The mobile crusher plant is also used in crushing the broke wood of fiber structure, flexibility and strong tenacity, paper or broken asbestos, slags of cement for recycling of the asbestos fibers and so on.
In addition, mobile crusher plant can be used not only in crushing production line; it can also be used in the sand making production line. And can be used in dressing production line to take the place of cone crusher. The main working part of the mobile crusher plant is the hammer (also called hammer) rotor. The rotor disc is mainly composed by the spindle, pin shaft and a hammer. The motor is to drive the rotor cavity in broken high rotation speed. Materials enter into the machine from the mouth to the feeding, and then are blowed, impacted, sheared, abraded and shattered by the high-speed moving hammer. In the bottom of the rotor, there installed with a sieve plate. The crushing materials of a size less than that of the screen whole level will be discharged through the sieve plate, the size of which greater than that of the screen hole will still stay on the sieve plate to be farther crushed and grand by the hammer, finally through the sieve turned out.